Edge color - To change the edge color of the screen to gray, red, green, blue, yellow, navy,
dark gray or black.
Edge type - To change the edge type between raised, depressed, outline, L. Shadow, R.
Shadow or None.
BK color - Select the BK color between red, green, blue, yellow, navy, dark gray, black, gray.
BK opacity - To select the opacity between solid and trnsl.
4. EAS SETUP
-This system can display EAS (Emergency Alert System) message broadcast pursuant to
47CFR11.117 of the FCC Rules.
-Press up or down button to select this item, and press right button to enter.
-Option: always, skip low priority and skip low/medium priority
-Press up or down button to select what you desire and press OK/ENTER button to confirm,
then there will be a √ icon in the frame. Press OK/ENTER button again, the icon will
disappear.
5. PROGRAM CONTROL
-Press up or down button to select this item.
-Press ENTER button to enter the PROGRAM CONTROL menu, then the screen will display
the following picture.
- To input password "0000" in order for the child not to change any settings.
- If password is invalid, input numbers are cleared and you could input password again; when
password is valid, enter the menu automatically.
- Then press up/down button to choose the item you want to set. And press left/right button to
switch items on or off.
RRT Setting
- Press RESET is for resetting RRT information.
Movie Ratings
- After enter the PROGRAM CONTROL, press UP/DOWN key to enter the Movie Ratings
sub-menu and select the rating you want by pressing UP/DOWN button.
- Press LEFT/RIGHT button to switch the check box between view and block and the default
mode is View.
To Next Page
Loading...