QUANZHOU RISEN RS-507M - Set Mode Configuration; Set Mode Programming; Scan Settings

SET MODE
■ Set mode programming
Set mode is used to change the conditions of the transceiver’s functions: Scan type
(Normal or Priority), Scan resume timer, Weather alert, Dual/Tri-watch, DSC watch, Beep
tone, Auto acknowledgement and Favorite channel function.
◆ Set mode operation
① Turn power OFF.
② While pushing [16], turn power ON to enter Set mode.
③ After the display appears, release [16].
· “SCAN” appears at the channel comment indicator.
④ Push [16] to select the desired item, if necessary.
⑤ Push [▲] or [▼] to select the desired condition of the item.
⑥ Turn power OFF, then ON again to exit Set mode.
No.
Display
Item
Option
Default
1
SCAN
Scan type
n- (normal scan)
/ p- (priority scan)
n- (normal scan)
2
TIMER
Scan resume timer
of (OFF) / on (ON)
of (OFF)
3
WX ALERT
Weather alert
of (OFF) / on (ON)
of (OFF)
4
DUAL
Dual/Tri-watch
d-(Dualwatch)
/ t- (Tri-watch)
d-(Dualwatch)
5
DSC WATCH
DSC watch
of (OFF) / on (ON)
of (OFF)
6
BEEP
Beep tone
of (OFF) / on (ON)
on (ON)
7
AUTO ACK
Auto
acknowledgement
of (OFF) / on (ON)
of (OFF)
8
FAVORITE CH
Favorite channel
of (OFF) / on (ON)
on (ON)
■ Set mode items
◆ Scan type
The transceiver has 2 scan types: Normal scan and Priority scan. Normal scan searches
all TAG channels in the selected channel group. Priority scan searches all TAG channels
in sequence while monitoring Channel 16.
◆ Scan resume timer
The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF
is selected, the scan pauses until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been received on any other channel than
Channel 16.
◆ Weather alert
A NOAA broadcast station transmits a weather alert tone before important weather
information. When the weather alert function is turned ON, the transceiver detects the
alert, then the “WX ALT” indicator blinks until the transceiver is operated. The previously
selected (used) weather channel is checked any time while scanning.
·“WX ALT” appears instead of “WX” indication when the function is set ON.
◆ Dual / Tri-watch
This item can be selected as Dualwatch or Tri-watch.