EN.
15
The Qubino Smart Meter is certified by an independent European Institute and has CE,
FCC, LVD and EMC certificates to ensure the highest safety standards.
3.2. Highlights
Remote (via smartphone or PC) and local measuring energy and optional* control 2
separate electrical circuits
Use the optional contactor or bi-stable switch with the Smart Meter to facilitate the
switching of power circuits or appliances
Ideal for fast switching of motors, electric heating and lights
Works with toggle switches and push-button (momentary switches)
Highly accurate monitoring and energy measurements
Features one of the easiest and quickest installations of devices of this kind – DIN rail
installation
Saves and restores the last status after a power failure.
Supports auto-inclusion mode for quick set up
Can automatically turn devices on and off after a set period of time (helpful when you’re
away from home, for example)**
Supports additional parameters for expert users, which allows for advanced
configuration**
Acts as a signal repeater which improves the range and stability of your Z-Wave network
Can be used to remotely control and trigger other devices in your Z-Wave network
*with additional external contactors - IKA/BICOM. IKA and BICOM are sold separately - for more info, please see
Qubino catalogue. Product ordering codes (model numbers): IKA232-20/230V: 030 046 833 000; BICOM432-40-
WM1: 30.074.038
**Your gateway (hub) needs to support advanced configuration and parameter input if you wish to use this
feature
To Next Page
Loading...
Need help?
General