ZK105M User Manual
1 Introduction
This document describes how the ZK105M enters transparent mode to debug module instructions.
The ZK105M Series are a series of water resistant GPS tracker designed for Scooter. Their built-in GPS
receiver has superior sensitivity and fast time to first fix (TTFF). Their LTE allows the ZK105M Series'
location to be monitored in real time or periodically tracked by a backend server or other specified
terminals. Their built-in 3-axis accelerometer allows motion detection and extends battery life through
sophisticated power management algorithms. It built-in high brightness color indicator and audio
broadcast function. It built-in high brightness color indicator and audio broadcast function. System
integration is straightforward as complete documentation is provided for the full featured @Track protocol.
The @Track protocol supports a wide variety of reports including emergency, low battery and scheduled
GPS position.
2 BLE
2.1 BLE working mode explanation
ZK105M is installed in the SharedScooter and supplied by the main battery of Scooter. With the external
power(main battery of Scooter) supplying , the BLE of ZK105M works. Otherwise with the backup battery
of ZK105 supplying, BLE stops working.
2.2 BLEinstructions
Heartbeat packet uploaded from ZK105M to Server includes 20 bytes dynamic password
(BLE Command Password).After successfully connected with the BLE of ZK105,It is able to
send command <AT+BKSCT=BLE Command Password,0$> to unlock Scooter or <AT
+BKSCT=BLE Command Password,1$>to lock Scooter by BLE channel.
3 NFC
NFC function can be set enable or disable through command. It need enable before applying NFC function.
3.1 Enable/Disable NFC function
CommandtoenableNFC：AT+GTVAD=ZK105,0,0,0,1,,,,FFFF$
CommandtodisableNFC：AT+GTVAD=ZK105,0,0,0,0,,,,FFFF$
3.2 NFCInstructions
After ZK105M NFC function enabled, it is able to take NFC tool to send command <AT+BKSCT=BLE
Command Password,0$>to unlock Scooter or <AT+BKSCT=BLE Command Password,1$> to lock
Scooter by NFC channel.
3
To Next Page
Loading...
Need help?
General
