5G Module Series
5G-REDCAP_EVB_User_Guide 14 /
46
115200 bps
Debug UART:
l For debugging
l Default baud rate:
115200 bps
Codec board TE-A connector
l 1 digital audio codec board
interface:
Supports TLV320AIC3104
TE-A (default) codec board
l 3 analog audio interfaces:
Used for loudspeaker and
earphone
Designed for loudspeakers
l Support (U)SIM card
insertion detection
l Support dual (U)SIM card:
1.8 V and 3 V
Power supply ON/OFF indicator
5 LEDs available for signal
indication
Module operation status indicator,
indicating whether the module is
turned on
Network mode indicator, indicating
NET_MODE status of the module
Network status indicator,
indicating NET_STATUS status of
the module
Sleep status indicator, indicating
SLEEP status of the module
SLIC board TE-A connector
Supports SI32185 TE-A
(default) SLIC board
Used for connecting applicable
modules
J0301,
J0302,
J0401,
J0402
J0301/J0302:
l Supports PCIe PHY
J0401/J0402:
l Supports SGMII/RGMII
interface PHY
l Supports SGMII PHY
QEP8111 by default
l Supports PCIe and SDIO
interfaces’ Wi-Fi
l Supports PCIe Wi-Fi