Need help?Do you have a question about the Quectel Smart EVB G2 and is the answer not in the manual?
General| Touch Panel | Capacitive touch panel |
|---|---|
| Camera | 5MP rear camera |
| Connectivity | Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0 |
| GNSS | GPS, GLONASS, BeiDou, Galileo |
| Interfaces | USB Type-C |
Details the revision history of the document, including dates and authors.
Essential safety guidelines for operation, service, and usage of cellular terminals and modules.
Detailed description of the Smart EVB G2's features, including interfaces, power, and connectivity.
An overview of all hardware interfaces available on the Smart EVB G2, with diagrams.
Visual representations of the top and bottom sides of the Smart EVB G2 board.
Lists all accessories included in the Smart EVB G2 kit, with descriptions and quantities.
Details how to power the Smart EVB G2 using DC adapter or Li-polymer battery.
Describes the DC power jack and required adapter specifications for powering the EVB.
Explains the battery interface, its circuit design, pin assignments, and definitions.
Instructions for modifying the EVB to power the module solely via DC adapter without a battery.
Describes the function of the power supply switches used for selecting power source and power on/off.
Reference circuit design and notes for the main Liquid Crystal Module (LCM) interface.
Reference circuit design for the secondary Liquid Crystal Module (LCM) interface.
Explains the PWM dimming step-up LED driver for the secondary LCM's backlighting.
Reference circuit design for the onboard loudspeaker interface.
Describes the headset interface, including circuit design and pin assignments.
Reference circuit design for the earphone interface.
Explains microphone interfaces for MEMS-type and ECM-type microphones.
Step-by-step guide on how to power on the Smart modules using the EVB.
Explains how to establish communication with the module via USB or UART interfaces.
Details connecting the EVB to a PC via USB and configuring communication ports.
Describes connecting via UART using a USB-to-RS232 converter and viewing COM ports.
Step-by-step guide for upgrading the smart module's firmware using the QFIL tool.
Instructions on how to reset the smart module using the reset button S1505.
Details the methods for powering off the smart module, including menu selection and button press.
Lists related hardware design and reference documents for Quectel modules.
To Next Page
