Need help?Do you have a question about the Quectel 5G Module Series and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | 5G Module Series |
| Category | Motherboard |
| Language | English |
Confidentiality of documents and information.
Rights and restrictions related to copyrighted material.
Records changes made to the document over versions.
Lists modules compatible with this evaluation board.
Explains special marks used in the document.
Visual representation of the EVB's top and bottom sides.
Details the physical layout and location of components on the EVB.
Explains how to power the EVB using different sources.
Describes the connector for attaching the 5G module TE-A to the EVB.
Details the USB Type-C interface for communication and data transfer.
Provides a USB-to-UART bridge for debugging and main communication.
Describes the digital and analog audio interfaces on the EVB.
Explains the circuit design for connecting a loudspeaker.
Details the circuit design for connecting an earphone.
Describes the circuit design for handset audio interfaces.
Details the two 8-pin push-push type (U)SIM card connectors.
Describes the connector for connecting an SD card.
Details the SLIC TE-A interface connector.
Explains the connectors for testing Wi-Fi functionality.
Describes interfaces for testing PHY functionality (PCIe, SGMII/RGMII).
Lists the six antenna connectors on the EVB.
Details the function of switches and buttons on the EVB.
Explains the function of the five status indication LEDs on the EVB.
Describes test points for obtaining signal waveforms.
Step-by-step instructions for powering on the module and EVB.
Describes two methods for safely shutting down the module.
How to establish communication with the module using a USB connection.
How to connect and communicate using the USB-to-UART interface.
Procedures for upgrading the module's firmware via USB.
Steps for performing an emergency firmware download.
Steps for performing a normal firmware download.
Instructions for resetting the module in case of emergencies.
How to configure the EVB to test module power consumption.
Lists supplementary documents and their identifiers.
Provides definitions for abbreviations used in the manual.
To Next Page
