Need help?Do you have a question about the Quectel L86 and is the answer not in the manual?
General| Update Rate | 10 Hz |
|---|---|
| Protocols | NMEA, PMTK |
| Dimensions | 10.1mm × 9.7mm × 2.4mm |
| TTFF (Hot Start) | 1s |
| Power Consumption (Acquisition) | 25mA |
| Power Consumption (Tracking) | 20mA |
| Operating Temperature | -40°C to +85°C |
| Frequency | L1 (1575.42 MHz) |
| GNSS | GPS, GLONASS, BeiDou, Galileo |
| Position Accuracy | 2.5m CEP |
| Operating Voltage | 3.3V |
| Interface | UART |
| Channels | 33 |
| Sensitivity | -167 dBm |
Essential safety precautions for operating, servicing, and repairing terminals with Quectel modules.
Illustrates the EVB's top view, identifying key components and interfaces for user reference.
Lists and describes the components included in the Evaluation Board (EVB) kit for setup.
Provides instructions for assembling the EVB and its accessories, referencing the included instruction sheet.
Details the micro-USB connector's role in power supply input and NMEA data output.
Describes the antenna connector used for attaching an external active GNSS antenna to the EVB.
Illustrates and explains the function of the switches and buttons present on the EVB.
Explains the status LEDs on the EVB, their names, and how they indicate module status.
Illustrates the EVB's test points, offering a reference for technical debugging and signal access.
Guides users on establishing PC-EVB communication via micro-USB using the QCOM tool.
Details the procedure for upgrading module firmware using the FlashTool software via micro-USB.
Explains the process of configuring COM port and baud rate settings in PowerGPS for connection.
Details the icons and parameters displayed in the PowerGPS interface for GNSS data interpretation.
Describes how to send PMTK commands via PowerGPS for controlling and configuring the GNSS module.
Guides on performing Time to First Fix (TTFF) tests under various conditions using the PowerGPS tool.
To Next Page
