Quectel Smart EVB G2 User Manual

Smart LTE Module Series
Smart EVB G2 User Guide
Smart_EVB_G2_User_Guide Confidential / Released 14 / 59
VOL_UP
S1506
Used to turn the volume up
VOL_DOWN
S1507
Used to turn the volume down
USB
J0601
USB type-C connector
USB_VBUS power supply voltage: +5.0V
Audio
Speaker
Used for loudspeaker
Rated resistance: 8Ω
Rated power: 1.5W
Earphone
Used for earphone
Rated resistance: 32Ω
Rated power: 30mW
MIC (MEMS)
Used for MEMS-type microphone
MIC (ECM)
Used for ECM-type microphone
J1202
Audio Jack for headset
(U)SIM
J1001
Main (U)SIM card connector
J1002
Sub (U)SIM card connector
UART
J1401
Main UART port
J1402
Debug UART port
SD
J1101
SD card connector
LEDs
D1501
D1512
D1513*
D1501 indicates the power supply of the module
D1512 indicates the charge status of the module
D1513* indicates the operation status of the module
TE-A
J0101, J0102
Connectors for connecting Smart TE-A and Smart EVB G2
Cameras
J0401
Rear camera connector, support 16M CMOS sensor
J0402
Front camera connector, support 8M CMOS sensor
J0403
Depth camera connector, support 2M CMOS sensor
Flashlights
D0301
Flashlight LED1 for testing module’s flashlight interfaces
D0302
Flashlight LED2 for testing module’s flashlight interfaces
LCM and TP
J0803
Connector for main LCM
J0804
ZIF connector for main touch panel
J0801
Connector for secondary LCM
Quectel
Confidential

Quectel Smart EVB G2 Specifications

General

Brand	Quectel
Model	Smart EVB G2
Category	Motherboard
Language	English