GNSS Module Series
L26-LB EVB User Guide
L26-LB_EVB_User_Guide 25 / 28
Figure 20: Set TTFF Time-out (Sec)
Generally, if hot start is selected, “TTFF Time-out (sec)” is recommended to be set as 10 s. If warm start
is selected, it can be set as 50 s. If cold start is selected, it can be set as 100 s. “TTFF Time–out (sec)”
can help judge TTFF and save time.
Step 4: After all above operations, click the “Run” button to start the test and it can be stopped by
clicking “Stop” button.
To Next Page
Loading...
