Need help?Do you have a question about the Quectel RM510Q-GL and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | RM510Q-GL |
| Category | Control Unit |
| Language | English |
Overview of the RM510Q-GL hardware design document and its purpose.
Lists the standards that the module complies with for its design and operation.
Explains special marks used in the document and their meanings.
Provides an overview of the RM510Q-GL module, its capabilities, and applications.
Details the main features and functionalities of the RM510Q-GL module.
Information on the evaluation board provided by Quectel for application development.
Illustrates the internal block diagram and major components of the RM510Q-GL module.
Provides a detailed pinout diagram and assignment for the module's connectors.
Details the function and characteristics of each I/O pin on the module.
Summarizes the different operating modes of the module like Normal, Sleep, and Airplane.
Explains how the module enters and operates in sleep mode to conserve power.
Describes how to enable/disable airplane mode using hardware or AT commands.
Details the USB and PCIe interfaces for communication between the module and the host.
Specifies voltage, ripple, drop requirements, and reference design for the module's power supply.
Details module power-on, power-off, and reset procedures using pins and AT commands.
Details the (U)SIM interface, pin definitions, hot-plug, and connector types.
Provides the pin definitions for the (U)SIM interface.
Explains the hot-plug capability of the (U)SIM card and related AT commands.
Details reference circuits for normally closed and normally open (U)SIM card connectors.
Provides guidelines for designing reliable (U)SIM card interfaces.
Details the USB 3.1 & 2.0 interface compliance, speed, and usage.
Covers PCIe interface compliance, modes, pin definitions, and timing.
Details the Pulse Code Modulation (PCM) interface for audio codec applications.
Details pins for controlling module functions and indicating status.
Details Cellular/WLAN Coexistence and Antenna Tuner Control interfaces.
Details the four configuration pins used for module setup.
Details the mmWave IF interfaces, their assignment, definition, and characteristics.
Details pin definitions, port mapping, operating frequencies, sensitivity, and output power for cellular antennas.
Details the GNSS antenna connector, frequency, and performance metrics.
Details antenna connector locations, sizes, installation, and recommended manufacturers.
Specifies the requirements for antennas used with the module.
Details the voltage and ripple requirements for the module's power supply.
Provides detailed current consumption values for various operating states and modes.
Details digital I/O logic levels and (U)SIM interface voltage requirements.
Covers ESD precautions and thermal dissipation strategies for the module.
Lists absolute maximum ratings and operating/storage temperature ranges for the module.
Provides detailed mechanical dimensions of the RM510Q-GL module.
Illustrates module views and mentions the M.2 connector standard.
Describes the packaging procedures and tray sizes for the modules.
Lists related documents and provides a glossary of terms and abbreviations.
To Next Page
