Quectel RM510Q-GL - Antenna Requirements

5G Module Series
RM510Q-GL Hardware Design
RM510Q-GL_Hardware_Design 71 / 88
5.4.5. Recommended Manufacturers of RF Connector and Cable
For more details, visit https://www.i-pex.com.
5.5. Antenna Requirements
Table 43: Cellular Bands Supported by RM510Q-GL Antenna Connectors
The following table shows the requirements on WCDMA, LTE, 5G NR antenna and GNSS antenna.
Table 44: Antenna Requirements
Antenna
Description
Frequency
ANT0
Antenna0 interface:
5G NR: MHB_TRX & n41 TRX1 & n77/n78/n79_PRx MIMO;
LTE: MHB_TRX & UHB_PRX MIMO
WCDMA: MHB_TRX
1400–5000
MHz
ANT1
Antenna1 interface:
5G NR: LB_TRX & MHB_DRX MIMO & n41_DRx1
& n77/n78/n79_DRx MIMO
LTE: LB_TRX & MHB_DRX MIMO & UHB_DRX MIMO & LAA_PRX
WCDMA: LB_TRX
600–6000
MHz
ANT2
Antenna2 interface:
5G NR: LB_DRX & MHB_PRX MIMO & n41 TRX0 & n77/n78/n79 TRX
LTE: LB_DRX & MHB_PRX MIMO & UHB_TRX
WCDMA: LB_DRX
600–5000
MHz
ANT3_
GNSSL1
Antenna3 interface:
5GNR: MHB_DRX & n41 DRX0 & n77/n78/n79_DRX
LTE: MHB_DRX & UHB_DRX & LAA_DRX
WCDMA: MHB_DRX
GNSS: L1
1400–6000
MHz
Type
Requirements
WCDMA/LTE/5G NR
VSWR: ≤ 3
Efficiency: > 30 %
Input Impedance: 50 Ω
Cable insertion loss: < 1 dB
WCDMA B5/B6/B8/B19
LTE B5/B8/B12(B17)/B13/B14/B18/B19/B20/B26/B28/B29/B71
5G NR n5/n8/n12/n20/n28/n71
Cable insertion loss: < 1.5 dB