Need help?Do you have a question about the Quectel RM502Q-AE and is the answer not in the manual?
General| Form Factor | M.2 |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Network Standards | 5G NR, LTE, WCDMA |
| 5G NR Sub-6 GHz | Yes |
| 5G NR mmWave | No |
| LTE Category | Cat 20 |
| Category | Cellular Module |
| Module Type | 5G |
| Weight | 10g |
| Storage Temperature | -40°C to +90°C |
| Interface | PCIe, USB 3.0, UART |
| WCDMA | Supported |
| LTE | Supported |
| 5G NR Bands | n1, n3, n5, n7, n8, n28, n77, n78 |
| DL 4x4 MIMO | Supported |
| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS |
| AT Command Set | Supported |
| Max Uplink Speed | 150 Mbps |
| SIM | 1.8V/3.0V SIM card |
| Firmware Update | USB |
| Certifications | CE, FCC, GCF, PTCRB |
Crucial safety precautions for operating the module and associated devices.
Detailed list of the module's technical features, specifications, and capabilities.
Visual representation of the module's pin layout and numbering.
Detailed explanation of each pin's function, type, and power domain.
Specifications and requirements for the module's power supply, including voltage and ripple.
Details the (U)SIM interface circuitry, card support, and hot-plug functionality.
Description of the USB interface, its specifications, and pin definitions.
Information on the PCIe interface, its compliance, speed, and pin definitions.
Covers pins for module control (e.g., airplane mode) and status indication (e.g., LEDs).
Defines the four RF antenna interfaces and their pin assignments.
Shows maximum and minimum RF output power for different modes and bands.
Details conducted RF receiving sensitivity across various bands and technologies.
To Next Page
