Quectel RM502Q-AE - RF Bands Supported by Antenna Connectors; Antenna Installation; Antenna Requirements

5G Module Series
RM500Q-AE&RM502Q-AE Hardware Design
RM500Q-AE&RM502Q-AE_Hardware_Design 61 / 83
5.4.1 RF Bands Supported by Antenna Connectors
Table 28: RF Bands Supported by RM500Q-AE&RM502Q-AE Antenna Connectors
n77 group also includes B42/B48 function.
5.5. Antenna Installation
5.5.1. Antenna Requirements
The following table shows the requirements on WCDMA, LTE, 5G NR antenna and GNSS antenna.
Pin
Name
Description
Frequency
ANT0
Antenna0 interface:
5G NR:
MHB_TRx & n41/n77/ _PRx MIMO;
LTE: MHB_TRx & UHB_PRx MIMO
WCDMA: MHB_TRx
1400–5000 MHz
ANT1
Antenna1 interface:
5G NR:
LB_TRx & MHB_DRx MIMO & n41_DRx & n77_DRx MIMO
LTE:
LB_TRx & MHB_DRx MIMO & UHB_DRx MIMO & LAA_PRx
WCDMA: LB_TRX
600–6000 MHz
ANT2
Antenna2 interface:
5G NR:MHB_PRx MIMO & n41/n77 TRx
LTE:LB_DRx & MHB_PRx MIMO & UHB_TRx
WCDMA: LB_DRx
600–5000 MHz
ANT33_
GNSSL1
Antenna3 interface:
5GNR:n41_DRX MIMO & n77_DRX
LTE:MHB_DRX & UHB_DRX & LAA_DRx
WCDMA:MHB_DRX
GNSS: L1
1400–6000 MHz
NOTE