Quectel RM510Q-GL - Key Features

5G Module Series
RM510Q-GL Hardware Design
RM510Q-GL_Hardware_Design 15 / 88
1.
1
)
These bands work with mmWave antennas
,
and they support NSA only.
2.
2
)
These bands
support
receiving only.
The module
can be applied
to the
following fields:
⚫
Rugged
t
ablet PC and
l
aptop
c
omputer
⚫
Remote
m
onitor s
y
stem
⚫
Smart
m
eter
ing
s
ystem
⚫
Wir
eless CPE
⚫
Smart TV
⚫
Outdoor
l
ive devices
⚫
Wireless
r
outer and switch
⚫
Other
w
ireless
t
erminal devices
2.2. Key Features
The following table describes key features of RM510Q-GL.
Table 3: Key Features of RM510Q-GL
Feature Details
Function Interface PCI Express M.2 Interface
Power Supply
⚫ Supply voltage: 3.135–4.4 V
⚫ Typical supply voltage: 3.7 V
(U)SIM Interface
⚫ Compliant with ISO/IEC 7816-3
⚫ Support (U)SIM card: Class B (3.0 V) and Class C(1.8 V)
⚫ Support single (U)SIM slot
USB Interface
⚫ Compliant with USB 3.1 and 2.0 specifications, with maximum transmission
rates up to 10 Gbps on USB 3.1 and 480 Mbps on USB 2.0.
⚫ Used for AT command communication, data transmission, firmware
upgrade, software debugging, GNSS NMEA sentence output and voice
over USB.
⚫ Supports USB serial drivers for: Windows 7/8/8.1/10, Linux 2.6–5.4,
Android 4.x/5.x/6.x/7.x/8.x/9.x/10
PCIe Interface
⚫ Complaint with PCIe Gen 3, support 8 Gbps per lane, PCIe × 1.
⚫ Used for AT command communication, data transmission, firmware
upgrade, software debugging, GNSS NMEA sentence output
NOTES
The Host Manufacturer will execute the mmWave bands' certification.
host manufacturer can't use the active mmWave antenna directly.
with this module, this software will control the module work with active mmWave antenna. The
We will provide software to host manufacturers when they use an active mmWave antenna
3: This module supports mmWave Bands, and marketing without active mmWave antenna.