Quectel GSM/GPRS Module Series User Manual

GSM/GPRS Module Series
GSM QuecCell AT Commands Manual
GSM_QuecCell_AT_Commands_Manual Confidential / Released 8 / 27
Parameter
Read Command
AT+QENG?
Response
The type of the cell information URCs is control by <dump>
parameter:
+QENG: <mode>,<dump>
URCs of the serving cell information:
+QENG:
0,<mcc>,<mnc>,<lac>,<cellid>,<bcch>,<bsic>,<dbm>,<c1
>,<c2>,<txp>,<rla>,<tch>,<ts>,<maio>,<hsn><ta>,<rxq_s
ub>,<rxq_full>
URCs of 1-6 the neighboring cell information:
[+QENG: 1,list of (<ncell>,<bcch>,<dbm>,<bsic>,<c1>,
<c2>,<mcc>, <mnc>,<lac>,<cellid>)…]
URCs of cell frequency list(CA) of the serving cell:
[+QENG: 2,list of (<arfcn>)…]
OK
Write Command
AT+QENG =<mode>[,<dump>]
Response
Switch on or off engineering mode. It will report +QENG:
(network information) automatically if <mode>=2.
OK
ERROR
+CME ERROR: <err>
<mode> 0 Switch off engineering mode
1 Switch on engineering mode
2 Switch on engineering mode, and activate the URC report of network information
<dump> 0 Only display the information of serving cell
1 Display the information of serving cell and 1-6 neighboring cells
3 Display the information of serving cell and 1-6 neighboring cell, list of ARFCN and
Cell frequency list (CA) of the serving cell
<mcc> Mobile country code
<mnc> Mobile network code
<lac> Location area code in hex format
<cellid> Cell ID in hex format
<bcch> Absolute Radio Frequency Channel Number of Broadcast Control Channel BCCH
<bsic> Base station identity code
<dbm> Receive signal level in dBm unit
<c1> C1 value
Quectel
Confidential

Quectel GSM/GPRS Module Series Specifications

General

Brand	Quectel
Model	GSM/GPRS Module Series
Category	GSM/GPRS Modules
Language	English