Need help?Do you have a question about the Quectel M10 and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | M10 |
| Category | GSM/GPRS Modules |
| Language | English |
Document revision history detailing changes, dates, and authors for various versions.
Essential safety precautions for operating the M10 module and EVB in various environments.
Illustrates the physical layout of the M10 EVB board, identifying key components and connectors.
Lists and illustrates the essential accessories provided with the M10 EVB kit for setup and use.
Details the power connection for the M10 EVB, including input voltage, current rating, and ground pins.
Describes the audio interfaces for microphone and speaker inputs and outputs, detailing pin assignments.
Explains the SIM card slot connection, pin assignments, and function for network connectivity.
Shows the connection point for the external antenna required for GSM/GPRS communication.
Details the physical DB9 connectors used for serial communication and debugging purposes.
Describes the third UART port (UART3) and its configuration for dual UART functionality.
Explains the function of each switch on the EVB for power control, charging, and firmware download.
Details the status LEDs on the EVB, including their names, functions, and indication patterns.
Pin definition and layout for the CON103 test point connector on the M10 EVB.
Pin definition and layout for the CON101 test point connector on the M10 EVB.
Pin definition and layout for the CON102 test point connector on the M10 EVB.
Pin definition and layout for the CON401 test point connector on the M10 EVB.
Pin definition and layout for the CON501 test point connector on the M10 EVB.
Step-by-step guide on powering on the M10 EVB and verifying operational status via LEDs.
Instructions for establishing serial communication with the M10 module using HyperTerminal and AT commands.
Procedure for updating the module's firmware using the main serial port and a PC upgrade tool.
Method for safely powering down the M10 module using the PWRKEY button.
Procedure for immediate shutdown of the module using the EMERG_OFF button in emergency situations.
Details on enabling and using the UART3 port for dual UART functionality and communication.
Practical example of connecting the M10 module to the EVB for URAT communication and power supply.
To Next Page
