GNSS Module Series
LC86L EVB User Guide
LC86L_EVB_User_Guide 25 /22
Figure 19: Set TTFF Time-out (Sec)
Generally, if hot start is selected, “TTFF Time-out (sec)” is recommended to be set as 10 s. If warm start
is selected, it can be set as 50 s. If cold start is selected, it can be set as 100 s. “TTFF Time–out (sec)”
can help judge TTFF and save time.
Step 4: After all above operations, click the “Run” button to start the test and it can be stopped by
clicking “Stop” button.
To Next Page
Loading...
General