LPWA Module Series
BG950A-GL&BG951A-GL_Hardware_Design
85
/ 84
CE Statement
The minimum distance between the user and/or any bystander and the radiating structure of the
transmitter is 20cm.
Hereby, We, Quectel Wireless Solutions Co., Ltd. declares that the radio equipment type
BG951A-GL is in compliance with the Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District,
Shanghai
200233, China
https://www.quectel.com/support/downloadb/TechnicalDocuments.htm
The device operates with the following frequency bands and transmitting power:
FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based time-
averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements
of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user’s body
and must not transmit simultaneously with any other antenna or transmitter.
3.A label with the following statements must be attached to the host end product: This device contains
FCC ID: XMR2021BG951AGL.
4.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
❒ Catm LTE Band2/25:≤11.000dBi
❒ Catm LTE Band4/66:≤8.000dBi
❒ Catm LTE Band5/26:≤12.541dBi
❒ Catm LTE Band12:≤11.798dBi
❒ Catm LTE Band13:≤12.214dBi
To Next Page
Loading...
Need help?
General
