Quectel SC200E Series - Functional Diagram; EVB Kit

Smart Module Series
SC200E_Series_Hardware_Design 21 / 115
4
Within operating temperature range, the module meets 3GPP specifications.
up to 5 Gbps on USB 3.1 and 480 Mbps on USB 2.0
⚫ Supports USB OTG
⚫ Used for AT command communication, data transmission, software
debugging, and firmware upgrade
UART Interfaces
Three UART interfaces: UART0, UART1, and UART4 (debug UART)
⚫ UART0: four-wire UART interface supporting RTS and CTS hardware flow
control
⚫ UART1: two-wire UART interface
⚫ UART4 (debug UART): two-wire UART interface used for debugging by
default
SD Card Interface
⚫ Supports SD 3.0
⚫ Supports SD card hot-plug
(U)SIM Interfaces
⚫ Two (U)SIM interfaces
⚫ Supports USIM/SIM cards: 1.8/2.95 V
⚫ Supports Dual SIM Dual Standby (supported by default)
I2C Interfaces
⚫ Four I2C interfaces
⚫ Used for peripherals such as camera, sensor, touch panel, etc.
ADC Interface
One generic ADC interface, up to 15-bit resolution
Real Time Clock
Supported
Antenna Interfaces
SC200E-CE/EM/NA:
Main antenna, Rx-diversity antenna, GNSS antenna and Wi-Fi/Bluetooth
antenna interfaces
SC200E-WF:
Wi-Fi/Bluetooth antenna interface
Physical
Characteristics
⚫ Size: (40.5 ±0.15) mm × (40.5 ±0.15) mm × (2.85 ±0.2) mm
⚫ Package: LCC + LGA
⚫ Weight: Approx. 10.3 g
Temperature Range
⚫ Operating temperature range
4
: -35 °C to +75 °C
⚫ Storage temperature range: -40 °C to +90 °C
Firmware Upgrade
⚫ USB interface
⚫ OTA
RoHS
All hardware components are fully compliant with EU RoHS directive.