Quectel SC200E Series

Smart Module Series
SC200E_Series_Hardware_Design 62 / 115
3.21. Sensor Interface
The module supports communication with sensors via I2C interfaces, and it supports ALS/PS, BDS,
accelerometer, gyroscope, etc.
Table 25: Pin Definition of Sensor Interface
CSI1_LN0_P
66
19.18
CSI1_LN1_N
67
19.02
-0.26
CSI1_LN1_P
68
19.28
CSI1_LN2_N
72
19.53
0.3
CSI1_LN2_P
73
19.23
CSI1_LN3_N
70
18.93
0.11
CSI1_LN3_P
71
18.82
CSI0_CLK_N
157
20.94
0.21
CSI0_CLK_P
196
20.73
CSI0_LN0_N
158
18.74
0.34
CSI0_LN0_P
197
18.40
CSI0_LN1_N
159
17.18
-0.19
CSI0_LN1_P
198
17.37
CSI0_LN2_N
160
8.28
0.13
CSI0_LN2_P
199
8.15
CSI0_LN3_N
161
4.97
0.27
CSI0_LN3_P
200
4.70
Pin Name
Pin No.
I/O
Description
Comment
SENSOR_I2C_SCL
91
OD
I2C clock for external sensor
Need to be pulled up to 1.8 V
externally.
Can only be used to connect
sensor devices.
SENSOR_I2C_SDA
92
OD
I2C data for external sensor