Sportrex2 – Q6000A Subject to change. – 02|2016 – 9
Product overview
Scope of delivery
The scope of delivery includes some functional units of the Sportrex2 already preassembled.
f Unpack all supplied parts and place these on a clean surface.
f Check the contents of the package against the list provided.
Caution!
Contact our Service department immediately if any parts are missing or if you find that
the packaging or product is damaged, see “Support information” on page 33.
f Remove the packaging material and all protective caps, and dispose of them in accordance
with the environmental guidelines that apply in your region.
f Read the chapter “Assembly” on page 16 before you assemble parts.
1 Pennant with 2-part pennant staff and
centre piece
2 Tow bar with coupler and retaining strap
3 Push handle with hand strap
4 2 stabiliser tubes for the side panels
5 Cabin with seats and 5-point safety
harnesses
6 Wheel guard (2x)
7 2 wheels (20" with push-in axle and
2 reflectors on each)
8 2 head rests
9 Buggy wheel (in 2 parts with quick-release
clamp)
To Next Page
Loading...