Name: Quick CHC 1202 M
Brand: Quick
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CHC1202M IT GB - REV005B

SETTINGS MENU - CALIBRATION

AUTO FREE FALL

FREE FALL

SET VALUE:

0,5 s

Increase

Confirm value and go back to CALIBRATION menu.

Select the available values: OFF, from 0.1s to 7s. (default: OFF)

Through this management we set the time required by the windlass

auto free fall system to deactivate itself.

Decrease

0.1s

SET SAILFREE FALL

SPEED 20 M / M

CHAIN UP

ATTENTION: auto free fall management must be activated exclusively with windlasses equipped

with auto free fall system. Refer to the instruction manual relative to the windlass being used.

ATTENTION: If auto free fall management is activated, the "no sensor" signal time will vary

depending on the value entered in the AUTO FREE FALL parameter and the automatic descent

function will be deactivated; the latter will become active again once free fall management is

deactivated.

SETTING THE CHAIN COUNTER

Questions and Answers:

Need help?

Do you have a question about the Quick CHC 1202 M and is the answer not in the manual?

Quick CHC 1202 M Specifications

General