Quickie Jive User Manual

14 Quickie Jive
4.25 Stability of your wheelchair
Please follow the user instructions in this manual
regarding the use of seat lift and tilt modules and the use
of your chair on a slope.
WARNING!
Other variables can affect your chair stability, including:
Movement of the user
Effects of the addition of accessories or other equipment
Inappropriate adjustments or modifications to the
wheelchair
In some cases these issues are further compounded by
the effects of the local environment such as:
Hills•
Slopes•
Ramps•
Sloping/uneven footpaths •
Dropped kerbs•
Furthermore different body proportions of a wheelchair
user affect stability for example:
Lower limb wasting or amputation•
Increased upper torso mass•
Upper torso height•
Obesity•
4.26 Seat stay pin
A seat stay pin is provided on your powerchair to provide
access for service and maintenance. When the seat is
raised, ensure the spring pin clicks back into the lock
position to hold the seat upright.
WARNING:
Do not move the wheelchair with the seat stay pin in
place and make sure you are on flat stable ground. Make
sure that the pin is retracted before lowering the seat.
4.27 Wheels
DANGER!
Always use the pump that is supplied with the chair,
Never use a forecourt pump.
Inspect all tyres regularly for signs of wear.
Do not drive over anything that could cause punctures in
the tyres.
Ensure that there are no objects in your path that could
possibly become lodged in your chair mechanism or in
the spokes of the rear wheels. This could cause the chair
to come to a sudden stop.
Riding over drains or grids could cause the wheelchair
castors or wheels to become lodged, causing the chair to
come to a sudden stop.
Always maintain the correct pressure for the tyre. These
are listed in section 13 of this manual.
4.28 Rear view mirror
WARNING!
To avoid injury to people around you please be aware
that the mirror protrudes outside the space envelope of
the chair and could cause injury to someone when driving
past.
The mirror must be used on the 10KPH model on UK
roads.
Always make sure that when using the mirror that it
is clean and unbroken so that it does not impair your
visibility.
4.29 Crutch holder
WARNING!
Make sure that the crutch is securely fastened to the
crutch holder.
Make sure that the crutch is not interfering with the
mechanisms of the chair.
Make sure that the crutch does not protrude from the
chair.
Do not attempt to remove the crutch whilst the chair is in
motion.
Always come to a complete stop and turn off the power to
the controls before attempting to remove the crutch. This
will avoid accidentally operating the chair.

Quickie Jive Specifications

General

Brand	Quickie
Model	Jive
Category	Wheelchair
Language	English