6Revolution
Issue 5
4 7
5 6
Fig. 4
Fig. 3
Folding and opening
Semi-folded position
Release the backrest cord and
holding the chair as shown in Fig. 3
(semi-folded position) pull the main
frame lock release cord (4) and pull
the camber bar (5) toward you until
the front castors (6) are parallel
with the seat frame (7). This is the
fully folded position (Fig. 4).
Opening
Standing at the rear of the chair
hold the bottom of the backrest
tube and push the camber bar
away from you until the frame locks
into position.
Pull the backrest up into its used
position ensuring that the locks are
locked.
Replace the wheels by sliding the
axle into the sleeve until the
release button ‘pops’ out.
Warning:
The axle is not secure until the
outside quick-release button pops
out to its fully extended position.
To Next Page
Loading...
