35 Revolution
Issue 5
Lap belt instructions
Step 5
To secure the positioning belt to the
chair. Take one of the cable ties
supplied and thread through the
positioning belt strap. Then wrap
around the frame and fasten
together. DO NOT over tighten
positioning belt. Repeat steps 3-5
with both ends of positioning belt.
Step 6
To adjust the positioning belt use
the tri-glide buckles and the
fastening buckle.
Fastening buckle
Step 7
The positioning belt should be
adjusted so the fastening buckle is
situated in the middle of the
stomach.
Step 8
The positioning belt should be
adjusted so a hand can be placed
between the user and the belt.
Tri-glides
Step 5
Step 6
Step 7
Step 8
To Next Page
Loading...
