Quickie Salsa User Manual

SALSA/SALSA M 79
Rev.5.0
Model: Quickie Salsa M (MWD) With Re-hab Seat
ISO7176-15 Min. Max. Comments
Overall length (with legrest) - 1150 mm 70° hanger
Overall width 600 mm 660 mm 12” / 14” wheels
Total mass (w. batteries) 125 kg 176 kg without Balle/with Balle lift & tilt
Mass of the heaviest part - 98 kg
Chair with all no tool removal
parts taken off
Static stability downhill - 17°
worst case 41 cm deep seat, 0°
tilt, -4° recline
Static stability uphill - 9.5°
worst case 51 cm deep seat, 29°
tilt, 16° recline
Static stability sideways - 13.9°
worst case 41 cm deep seat, 0°
tilt, 0° recline
Energy consumption (max. range) - 26 km
Dynamic stability uphill - 8 °
9° tilt/16° recline &max. seat
height (not with balle)
Obstacle climbing (with kerb
climber)
75 mm Forward with 6 kph motors
Max. speed forward 6 kph 10 kph
10 kph only with 10 kph motor
option
Min. brake distance from max.
speed
1.0 m 1.2 m
1 m for 6 kph motor, 1.2 m for 10
kph motor
Seat plane angle -5° 30°
-5° only with MBL tilt + additional
brackets
Effective seat depth 400 mm 560 mm
Effective seat width 400 mm 560 mm
Seat surface height at front edge 450 mm -
Backrest angle -5° 12° mechanical
Backrest height 560 mm 700 mm
Footrest to seat distance 340 mm 540 mm
Leg to seat surface angle 110° -
Armrest to seat distance 210 mm 300 mm
Front location of armrest structure 260 mm 560 mm
Min. turning radius 670 mm - 70° hanger
Nominal battery voltage - 24V
Battery cut-off voltage - 16V
Battery fusible links - - 150A in line fuse on each battery
Quickie Direct Actuator Control
Box fusible link
- -
15A blade fuse located on AUX
supply of power loom
Mass of the test dummy - 140 kg
EN 12184 Min. Max. Comments
Max. kerb height - 75 mm
Ground clearance - 40 mm
Turning space 1000 mm 1150 mm
Speed control operation force -
2.2N R-Net
2.4N VR2
Direction control operation force -
1.7N R-Net
1.9N VR2
Maximum occupant mass
(test dummy mass):
140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and
control systems for
electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in
accordance with ISO
7176 -9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified
as a Class B power chair
NOTE: Salsa M is also
manufactured in the UK:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD

Quickie Salsa Specifications

General

Brand	Quickie
Model	Salsa
Category	Wheelchair
Language	English