Model: Quickie Salsa R (RWD) With Re-hab Seat
Maximum occupant
mass with Re-hab seat
(test dummy mass):
160 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and
test methods for static,
impact and fatigue
strengths
(ISO 7176-8)
b) power and
control systems for
electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in
accordance with ISO
7176 -9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is
specified as a Class B
power chair
ISO7176-15 Min. Max. Comments
Overall length (with legrest) 1100 mm 1140 mm 70° hanger
Overall width 580 mm 610 mm 12” / 14” wheels
Total mass (w. batteries) 120 kg 168 kg without Balle/with Balle lift & tilt
Mass of the heaviest part - 18.5 kg Heaviest removable part
Static stability downhill - > 20°
0° tilt/0° recline/40 cm deep & 50
cm seat height
Static stability uphill - 10.6°
9° tilt/16° recline& 45 cm seat
height
Static stability sideways - 15.2°
0° tilt/0° recline/40 cm deep & 50
cm seat height
Energy consumption (max. range) - 32
6 kph motor and 100 kg user
(ISO7176-4)
Dynamic stability uphill - 8 °
9° tilt/16° recline &max. seat
height (not with balle)
Obstacle climbing (with kerb
climber)
85 mm 100 mm
Max. speed forward 6 kph 10 kph
6 kph motor & 12.5” wheels/ 10
kph motor & 14” wheels
Min. brake distance from max.
speed
- - Dep. programming
Seat plane angle -5° 30°
-5° only with MBL tilt + additional
brackets
Effective seat depth 400 mm 560 mm
Effective seat width 400 mm 560 mm
Seat surface height at front edge 375 mm 490 mm 12” wheels / 385 mm 14” wheels
Backrest angle -5° 12° mechanical
Backrest height 560 mm 700 mm
Footrest to seat distance 340 mm 540 mm
Leg to seat surface angle 110° -
Armrest to seat distance 210 mm 300 mm
Front location of armrest structure 260 mm 560 mm
Min. turning radius 850 mm 910 mm 70° hanger
Nominal battery voltage 24V -
Battery cut-off voltage 16V -
Battery fusible links - - 150A in line fuse on each battery
Quickie Direct Actuator Control
Box fusible link
- - 15A AST Mini Blade
Mass of the test dummy - 160 kg
EN 12184 Min. Max. Comments
Max. kerb height 85 mm 100 mm with kerb climber
Ground clearance 70 mm 80 mm 12” / 14”
Turning space 1200 mm -
Speed control operation force - 2N
Direction control operation force - 1N