17.0 Performance checks:
After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning
correctly before it is used.
Visually inspect the wheelchair to make sure the •
legrests, armrests etc are correctly positioned and
attached to the wheelchair and all fasteners are
sufficiently tightened.
Make sure that the backrest is correctly fitted and •
adjusted.
Make sure that all of the cushions are in place.•
Switch on the hand control – Do the lights flash? This •
signifies that there is a fault in the electronic system.
Refer to section 8.0 for basic troubleshooting.
Perform the parking brake check.•
Operate all of the electric options, including lights •
and indicators (if fitted) to make sure that they work
correctly.
Drive the wheelchair in each of the drive profiles, (if •
installed), to make sure the wheelchair performs as it
did before.
WARNING!
If you are in any doubt about the performance requirements
of your wheelchair contact your Sunrise Medical authorised
dealer.
NOTE: Only the tasks in the GREEN boxes below should
be attempted by the user. If you are in any doubt, please
contact your Sunrise Medical authorised dealer.
17.1 Re-use
Due to its construction the Tango is ideal for inside use
(low seat height, compact dimensions) as well as outside
use, (lights, 40Ah/50Ah batteries, etc.).
Its high level of flexibility, due to the number of possible
adjustments, and the modular platform technology
(modular construction system) make the Tango ideal for
re-use.
Individual modules (seat tilt in space, backrest angle
adjustment) can be fitted and removed very quickly and
within the seating system there are a range of possibilities
so that individual adjustments can be made to suit the end
user.
Optional mounting of the operating unit on the left or right
side of the chair, with the possibility of changing later, and
adjustable distance from the backrest.
Maintenance and Inspection Schedule
Daily
Weekly
Quarterly
Six month
Annually
Check battery level indicator and charge if necessary.
¯
Check the joystick of the hand control is not bent or damaged.
¯
Ensure all removable parts are securely fastened.
¯
Check lapstrap for wear and make sure the buckle is operational.
¯
Parking brake test.
¯
Check tyres and inflate.
¯
Ensure the fasteners on the seat depth adjustment are tight,
¯
Ensure all cables and connectors are sound and are tidy and out of the way.
¯
Clean wheelchair and upholstery.
¯
Battery terminal inspection – Remove any corrosion and apply Vaseline.
¯
Check upholstery, seating, headrests, armpads and calfpads for wear.
¯
Complete inspection, safety check and service should be made by a
Sunrise Medical authorised dealer.
¯
To Next Page
Loading...
