Quicksilver 755OP — System & Component Overview and Operaon
35
18. Port & Starboard Flip Seats (oponal)
As an opon your boat may come equipped with ip seats, located on both the port and starboard
side of the cockpit. These seats replace the jump seats, and when not in use, it stores up out of the
way in the deck trail. To use, simply pull the rail located on the base of the seat out and down.
Stereo
USB port
Stereo
Seat base
Seat cushion
Jump Seat
17. Port & Starboard Jump Seats
Port and starboard jump seats are included for addional a seang. The base and cushion are
removable to allow for easier entry in and out of the boat. To install the seat, set the base into the
sloed bracket on the outboard side of the deck and push the inboard side down so that it engages
with the rubber stopper. Next, aach the cushion to the base.
Before using, verify that the jump seat is properly installed
securely in place.