Section VI - Servicing
Quincy Compressor-QSI
®
85
Fluid Scavenging System
Fluid from inside the separator element is returned to
the inlet valve or airend by a scavenger tube positioned
Failure to keep the orice
clean will result in excessive uid carryover. Cleaning of
NOTICE!
Do not ream the orice or change the orice size.
Do not install the orice reversed.
Figure 6-1. Scavenge Line Sight Glass
Air Filter
of the element is accomplished by unscrewing the wing
snugly after making certain the element is seated cor-
NOTICE!
Intake ltration equipment supplied from the
factory may not be adequate for extremely dirty
applications or some forms of dust or vapors. It is
the customer’s responsibility to provide adequate
ltration for those conditions. Warranty will be
voided if inadequate ltration causes a failure.
Control Line Air Filter
-
ing occurs only when the compressor is in the unloaded
To Next Page
Loading...
Need help?
General
