Section VII - Compressor Fluids
Quincy Compressor-QSI
®
91
Fluid Sample Valve
-
Figure 1-2. Fluid Sample Valve
Fluid samples should be taken from the sample valve
while the compressor is running at normal operating tem-
Fluid Filter
-
NOTICE!
Use genuine Quincy replacement lters only.
Figure 1-3. Spin-on Fluid Filter
-
tridge should be replaced under the following conditions,
whichever occurs rst:
•
• every 1,000 hours
•
NOTICE!
The uid lter maintenance indicator may read
high upon start up on cool mornings due to
sluggish uid creating higher than normal dif-
ferential pressures. Monitor indicator after the
uid warms up.
To Next Page
Loading...
Need help?
General
