Quoizel TF1427T - User Manual

Part
Description
Quantity
A
1pc.
1pc.
B
Finial
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
EstimatedAssemblyTime:15-20minutes
Preparation:Identify andinspect allparts beforebeginning installation.Check package
contentlist anddiagrams belowto besure allparts arepresent. Ifany partsare missing
ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer
servicefor replacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Assembly Instruction Sheet #IS-TF1427T
For Style TF1427T
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
1of4
BulbRecommended: (2) MediumBase 75WMaximum
Shade
1pc.
C
Flat Washer
Big Knurled Nut
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
A
B
D
E
D
1pc.
1pc.
E
Check Ring
2012 Quoizel Inc.
October2012
F
G
H
1pc.
F
Tube
G
1pc.
1pc.
H
Center Stem
Socket Assembly
Small Knurled Nut
J
1pc.
I
I
1pc.
J
Base
C

Summary

Warnings and Cautions

Safety Precautions

Electrical safety, electrician recommendation, bulb replacement, and glass handling safety.

Package Contents

Step 1: Attach Socket Assembly to Base

Connect Socket Assembly to Base

Thread Socket Assembly (I) to Base (J) and hand tighten.

Step 2: Attach Center Stem to Fixture Body

Connect Center Stem

Thread Center Stem (H) into Hex Coupling; place Tube (G) and Check Ring (F) over H; secure with Small Knurled Nut (E).

Step 3: Attach Shade to Fixture Body

Assemble Shade Components

Thread Big Knurled Nut (D) onto Center Stem (H), then place Washer (C) and Shade (B). Secure with Finial (A).

Step 4: Install Bulb

Install Light Bulb

Insert and screw in a standard base, maximum 75-watt bulb.

Quoizel TF1427T Specifications

General

Category	Outdoor Light
Style	Traditional
Material	Metal
Bulb Type	Incandescent
Bulb Base	Medium
Number of Bulbs	1
Damp Rated	Yes
Extension/Depth	9 inches
Wattage	100 watts
Voltage	120V