Quoizel NY8317Z - User Manual

Part
Description
Quantity
A Crossbar
1pc.
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
Fixture Body
B
C
D
E
F
Hex Nut
Lock Washer
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
2012 Quoizel Inc.
Mounting Ball
Mounting Screw
Assembly Instruction Sheet #IS-NY8317Z
For Style NY8317Z
1of6
A
B
C
D
E
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
F
G
2 pcs.
G
Candle Cover
Pleasegoto forproduct cleaning tips. Go to the
selection.
www.quoizel.com Care+ Maintenance
ToolsRequired: Flatheadscrewdriver,Phillips screwdriver,pliers, wirecutters, wire
strippers,electrical tape,safety glasses.
EstimatedAssemblyTime: 20-30 minutes
Preparation:Identify andinspect allparts beforebeginning installation.Check package
contentlist anddiagrams belowto besure allparts arepresent. Ifany parts are missing
ordamaged, donot attemptto assemble, install, or operate the fixture. Contact customer
servicefor replacementparts.
LightSource: (2) 60WMaximumCandelabraBase
RevisedDate: 2016-09-13
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com

Summary

Safety and Preparation

General Warnings and Cautions

Includes electrical safety, professional installation recommendation, and handling of glass parts.

Package Contents Overview

Lists all parts included in the package for fixture assembly, such as crossbar, screws, and fixture body.

Assembly Instructions

Attach Mounting Hardware to Crossbar

Line up holes on Crossbar and Fixture Body. Thread Mounting Screws, Lock Washers, and Hex Nuts. Hand tighten until snug.

Mount Crossbar to Outlet Box

Attach Crossbar to Outlet Box using Outlet Box Screws. Tighten until snug.

Make Wire Connections

Connect White to White, Black to Black, and Ground to Ground wires using connectors and tape.

Attach Fixture Body to Mounting Screws

Place Fixture Body backplate over Mounting Screws. Secure with Mounting Balls. Hand tighten until snug.

Attach Candle Cover to Socket

Place the Candle Cover over the Socket properly.

Install Light Bulb

Insert a candelabra base bulb (max 60W) into the socket and screw snugly into place.

Apply Silicone Sealer to Mounting Balls

Apply silicone sealer to threaded side of mounting balls and install onto mounting screws. Wipe off excess.

Apply Silicone Sealer to Backplate

Caulk around the fixture backplate where it meets the wall, avoiding the bottom for drainage.

Quoizel NY8317Z Specifications

General

Brand	Quoizel
Model	NY8317Z
Category	Outdoor Light
Language	English