Quoizel NY8315A - User Manual

Part
Description
Quantity
A Crossbar
1pc.
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
Fixture Body
B
C
D
E
F
Hex Nut
Lock Washer
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 Quoizel Inc.
Mounting Ball
Mounting Screw
Assembly Instruction Sheet #IS-NY8315A
For Style NY8315A
1of5
A
B
C
D
E
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
F
Pleasegoto forproductcleaningtips.Gotothe
selection.
(1)MediumBase150WMaximum
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissingor
damaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
September2015

Summary

Product Information and Safety

Warnings and Cautions

Important safety instructions and warnings for electrical installation and handling of the fixture.

Package Contents

List of parts included in the package with their descriptions and quantities.

Assembly Steps

Step 1: Attach Mounting Hardware to Crossbar

Connect mounting screws, lock washers, and hex nuts to the crossbar.

Step 2: Attach Crossbar to Outlet Box

Secure the crossbar assembly to the electrical outlet box.

Step 3: Make Wire Connections

Connect the fixture wires to the supply wires using wire connectors.

Step 4: Attach Fixture Body

Mount the fixture body to the backplate using mounting balls.

Step 5: Install Bulb

Insert the recommended bulb into the fixture socket.

Step 6: Apply Silicone Sealer to Mounting Balls

Apply sealant to mounting balls to prevent moisture entry.

Step 7: Apply Silicone Sealer to Backplate

Apply caulk around the backplate for weather sealing, ensuring drainage.

Quoizel NY8315A Specifications

General

Category	Outdoor Light
Style	Traditional
Finish	Antique Brass
Material	Metal
Backplate Width	5 inches
Number of Bulbs	1
Light Direction	Down
Safety Rating	UL Listed
IP Rating	IP44
Voltage	120V
Wattage	100 watts