Quooker PRO3 User Manual

1
3
2
4
Additional instruction guide PRO3
Please note:
Your installation may look dierent from the one shown in this guide. This instruction replaces
the “Contents of the pack” page and part C of the Installation guide if you have copper pipes.
Contents of the pack
1. PRO3 tank
2. Inlet reducing valve with bre washer
3. Isolation valve with lter and bre washer
4. Inlet couplings and bre washers

Quooker PRO3 Specifications

General

Tank Capacity	3 liters
Heating Time	10 minutes
Required Hole Diameter	35 mm
Energy Efficiency Class	A
Boiling Water Temperature	100°C
Installation	Under-sink
Material	Stainless Steel
Warranty	2 years
Power	1600 W
Voltage	230 V
Safety Features	Childproof tap

Summary

Contents of the pack

PRO3 tank

The main component of the Quooker PRO3 system.

Inlet reducing valve with fibre washer

Component for connecting the Quooker to the water pipe.

Isolation valve with filter and fibre washer

Valve for controlling water supply and filtering impurities.

Inlet couplings and fibre washers

Connectors and seals required for water supply connections.

Connecting water

Connect inlet valve

Steps to connect the inlet valve to the isolation valve with a fibre washer.

Connect cold water hose

Connect the cold water hose with its screen to the inlet valve.

Connect hot water hose

Connect the hot water hose with its screen to the mains.

Inlet couplings for G½" connection

Use G½" couplings with fibre washers for G½" connections if necessary.