Installation and testing of cable harness
and commissioning the RaceChip
4. Please connect the disconnected
plug of your vehicle with the counter-
part of supplied cable harness.
Please make sure that a clear „click“
sound can be heard when you plug
the connections.
5. The cable harness is now installed.
Please connect the RaceChip Pro 2
with the cable harness. The plug will
only t one way.
Finally, press the colored locking-plug
into the plug.
6. Assemble the cable harness with
the cable ties. An assembly to already
existing harnesses will be
advantageous.
To Next Page
Loading...
