Need help?Do you have a question about the Radcal Accu-Gold Touch and is the answer not in the manual?
General| Accuracy | ±5% |
|---|---|
| Battery Life | 8 hours |
| Storage Temperature | -20°C to 60°C |
| Display | Touchscreen display |
| Energy Range | 20 keV |
Describes the Accu-Dose system's measurement capabilities, components, and basic/advanced versions.
Lists the key components of the Accu-Dose diagnostic ion chamber system, including control unit, sensor, and cable.
Guides on connecting the sensor cable to the control unit, digitizer, and ion chamber.
Instructions for connecting the battery charger to the control unit and an AC outlet.
Explains how to turn on the Accu-Dose, the self-test process, and initial display information.
Details the 2-line display, special characters, and button functions for navigation and operation.
Describes how to make measurements, navigate menus, use the test button, and understand measurement completion.
Instructions on how to select and perform a dose rate measurement, including observing results.
Outlines steps like system equilibrium, high sensitivity settings, and avoiding movement during zeroing.
Explains how to configure various system settings, including corrections, sensitivity, and units.
Specifies the accuracy of ion chamber measurements under reference conditions.
Details the energy dependence and accuracy specifications for dose-diode measurements.
Describes XLPRO as an Excel add-in for data analysis and PC control of the Accu-Dose.
Explains the function of the extension cable for increasing the distance between the ion chamber and digitizer.
Details the 10A96 adapter for connecting 10X5 ion chambers to the 9660 digitizer.
Outlines the manufacturer's warranty coverage for defects in material and workmanship.
Explains policies regarding repairs not covered by the warranty, including misuse and unauthorized service.
To Next Page
