process measurements performed by the Accu-Dose™ System.
XLPRO, an Excel add-in, uses this capability to produce reports,
graphs and to automate measurements.
The Accu-Dose™ may be operated from a rechargeable NiMH
battery, from alkaline C cells, or from mains power.
The control unit is shown on page 5. The UP-arrow, DN-arrow,
select and test buttons and a 2-line display are on the front
panel. The green power button is located on the left end. The
battery charger connects at the rear.
The UP-arrow, DN-arrow and select pushbuttons are used to
navigate the menu and to activate measurements. The test
pushbutton provides a simulated x-ray signal so you can observe
how the measurements work. The power pushbutton provides for
orderly startup and shutdown.
2
To Next Page
Loading...
