Raddy PT-3 - Setting the Daily Alarms

Raddy PT-3 Manual [EN]
11
 Press “SET/MODE” to confirm your setting, the Hour display starts to flash. Now use“+” and “-” buttons to
set the correct hour.
 Press “SET/MODE” to confirm your setting, the Minute displays starts to flash. Now use “+” and “-” buttons
to set the correct minute.
 Press “SET/MODE” to confirm your setting and to end the setting procedures, enter the clock mode.
F.Y.I.:
 After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal
Time Mode.
 When the WIFI connection is successful, the time will be automatically updated to the network time, the
symbol “ ” will display, at the time of setting, and there is no need to set the time.
Setting the daily alarms:

Press once “
ALARM
” button, the display conversion to alarm activation mode. In this mode, press the
“
ALARM
” button again to activate the alarm function, at the same time, the sound of "BI" sounded, while the
alarm icon " " is displayed which means alarm has been activated. And then press “ALARM” button again,
you can turn off the alarm function, the alarm icon " " does not shows.

Press and hold down “
ALARM
” button for 2 seconds until Alarm Time hour display starts to flash. Use the“+”
and “-” buttons to set the required hour.

Press “
ALARM
” button to confirm your setting, the Minute display starts to flash. Use the “+” and “-” buttons
to set the required minute.

Press “
ALARM
” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “+” and
“-” buttons to set the minute of snooze you need.

Press “
ALARM
” button to confirm your setting and to end the setting procedure
F.Y.I.:
 After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal
clock mode.
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
 The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time