73
EN
11. Drawing in and fastening the belt
1. First, plug in the small appliances plug into the mains
connection of the RolloTron Swivel Winder Standard
DuoFern and subsequently the mains plug into the
socket.
3. Remove the mains plug again from the socket.
i
2. Press the Up button until the fastening hooks
are easily accessible in the reel compartment.
i
As no end points have been set yet, the drive
will stop as soon as you release the button.
CAUTION!
There is a risk of injury from the reel.
Never reach into the reel compartment when the motor
is running.
Fastening hooks
Reel compartment
The small appliances plug
in the mains connection
To Next Page
Loading...
Need help?
General