EasyManua.ls Logo

Radial Engineering J33 User Manual

Radial Engineering J33
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada
Tel: 604-942-1001
Fax: 604-942-1010
email: info@radialeng.com
www.radialeng.com
J33
Phono Preamp DI
User Guide
®
Question and Answer IconNeed help?

Do you have a question about the Radial Engineering J33 and is the answer not in the manual?

Radial Engineering J33 Specifications

General IconGeneral
Channels1
Input Impedance1 MΩ
THD< 0.005%
Frequency Response20 Hz - 20 kHz
Weight1.5 lbs

Summary

Introduction to Radial J33

Radial J33 Feature Set Overview

RIAA Preamp Explained

Input Panel Features

Power Indicator and Rumble Filter

Details the LED power indicator and the rumble filter switch.

Ground Lug and Phono Inputs

Covers the ground lug for turntables and RCA phono input jacks.

Output Panel Features

Balanced XLR and RCA Outputs

Describes the balanced low impedance XLR and RCA stereo outputs.

Power Connection and Stability

Details the 15VDC power supply connection and the no-slip pad.

Making Connections Guide

Frequently Asked Questions (FAQ)

RIAA Preamp and Cartridge Compatibility

Explains RIAA equalization and confirms use with magnetic cartridges.

Troubleshooting Feedback and Noise Issues

Addresses feedback with rumble filter and suggests isolation pads.

Power and LED Troubleshooting

Guides on checking power supply or phantom power if LEDs don't light up.

J33 Block Diagram and Specifications

Three Year Transferable Limited Warranty

Related product manuals