4
To further advantage the user, the X-Amp features two
outputs: Output-1 is a direct active output while output-2 is
transformer isolated. This allows two amps or effect pedals
to be used simultaneously without introducing hum or noise
caused by so-called ground loops. To further reduce
opportunity for noise, the X-Amp features two ground lift
switches to allow optimal ground conditions in complex
environments.
And like all Radial products, the X-Amp is built to handle abuse
with 14-gauge welded steel inner frame, baked enamel finish
and our innovative bookend design that creates a protective
zone around the switches, potentiometer and connectors. A
full-bottom no-slip isolation pad provides shock-mounting,
mechanical and electrical isolation and ‘stays-put’. The X-
Amp will not slide around or fall during a performance.
RADIAL X-AMP LAYOUT
The difference between a good product and a great product
can often come down to sound quality and ease of use. As
the X-amp has been primarily designed to work in conjunction
with guitar amplifiers, you will notice that the XLR input and
the DC supply connectors are on the rear and out of the way,
while the input connectors are on the front. This allows one
to place the X-amp on a guitar amplifier and have immediate
access to the ¼” output connectors without having to reach
behind. This also provides clear viewing of the clip LED
indicator and the output level control.
True to the Music
X•AMP User Guide
Radial Engineering
To Next Page
Loading...
Need help?
General
