How to fix Radic8 Hextio Air Cleaner that won't turn on?
If your Radic8 Air Cleaner isn't turning on, make sure both the AC and DC plugs are securely plugged into the correct input or socket. Also, verify that the switch at the wall socket is turned on.
Why is there minimal airflow in my Radic8 Hextio?
Reduced airflow in your Radic8 Air Cleaner could be due to a few reasons. The hybrid filter might be clogged and needs replacing. Also, check to ensure that the device's air intake or outlet isn't blocked. If you're using Manual mode, try increasing the fan speed.
What to do if Radic8 Hextio is very loud?
If your Radic8 Air Cleaner is making too much noise, check if the airflow intake or outlet are obstructed. If you're in Manual mode, try decreasing the fan speed or switch to Auto mode. The hybrid filter may also need replacing. Also, make sure the device isn't too close to a wall or in a corner, as this can amplify the noise.
Why does my Radic8 Hextio Air Cleaner emit an unusual odor?
An unusual odor from your Radic8 Air Cleaner may indicate that the carbon layer of the hybrid filter is saturated. In this case, consider replacing the hybrid filter.
What does a red flashing light mean on my Radic8 Air Cleaner?
The Reactor Chamber is due to be replaced by a Radic8-approved technician. Please contact your local Radic8 distributor for support.
How to fix Radic8 Steriliser that will not turn on?
If your Radic8 Steriliser isn't turning on, first ensure it's correctly plugged into a working, grounded outlet. If that's not the issue, replace the remote control batteries, paying attention to the correct polarity. Lastly, confirm that the AC outlet provides the necessary 220 voltage.
Why is my Radic8 Steriliser air purifying function not working properly?
If the air purifying function of your Radic8 Steriliser isn't working well, start by ensuring the room is adequately ventilated. Check and clean the pre-filter. If the issue persists, replace the HEPA filter. Make sure the unit is appropriately sized for the room and that airflow around the unit isn't restricted. Note that a new unit might emit a harmless odor for a week or two. Ensure pre-filters cleaned with water are completely dry before reinstalling. If used in environments with food odors, ensure proper ventilation.
What to do if my Radic8 Steriliser has weak airflow and is noisy?
Weak airflow and noise from your Radic8 Steriliser is often due to a pre-filter clogged with dust. Clean the pre-filter to resolve this. Also, remember to change the HEPA filter when it's due for replacement.
Why doesn't the timer preset work on my Radic8 Steriliser?
If the timer preset on your Radic8 Steriliser isn't working, make sure that the timer function has been activated according to the instructions.
General document identification.
Provides essential safety warnings and guidelines for operating the device safely.
Details labelling symbols for identification, and transport/storage symbols.
Explains various product certifications like CE, FCC, UL, UKCA, and BSMI.
Covers FCC compliance notices and guidelines for device disposal.
Lists all items included in the Hextio product package.
Details the different parts and functions of the Hextio device.
Explains the buttons and functions of the Hextio remote control.
Explains Auto/Manual modes, fan speed adjustment, light control, and sleep mode.
Describes the meaning of different light colors and patterns for White and Black Hextio models.
Step-by-step guide on how to replace the hybrid filter in the Hextio.
Information on when and how to replace the Reactor Chamber, requiring a technician.
Instructions on how to clean the exterior of the Hextio device.
General| Product Type | Air Cleaner |
|---|---|
| Power Consumption | 50 W |
| Voltage | 220-240 V |
| Technology | HEPA |
| Filter Life | 6-12 months |
| Connectivity | Wi-Fi |
| Filtration Technology | HEPA, Activated Carbon |
To Next Page
