cover.
B) Insert two AAA batteries (not included) into the battery compartment. Ensure the negative terminals
(marked by ‘–‘ symbols) on the batteries make contact with the springs in the battery compartment.
C) Replace the battery compartment cover.
4. Assemble the AC adaptor with the correct plug based on your region:
5. Insert the DC plug into the 12V DC input on the device:
Remove batteries from the remote control if not in use for an extended period.
!
Radic8 Hextio - 1_en
Copyright © 2022 Radic8 Page 15 of 31
To Next Page
Loading...
