8
Storing Preset Stations
You can store 10 FM, 10 AM, and 5 Weather (WX) stations.
1. Press repeatedly to select a radio band.
2. Tune your desired station.
3. Press MEMORY to enter programming mode. MEM
4. Press a number button ()
to store a preset in locations 1 to 5. To store in
locations 6 to 0, press SHIFT, then a number button.
5. Repeat step 2-4 to store more stations, or press any
other keys to quit programming mode.
Note: WX band presets can only be stored in locations 1 to 5.
You can set the radio to switch to standby mode
automatically after a set period of time.
1. When the radio is on, press SLEEP repeatedly to
toggle and select a sleep period ranging from 10 to
90 minutes: 90, 80... 20, 10.
2. After you set the timer, press SLEEP again to view
the remaining sleep time.
If you wish to cancel the sleep timer, press SLEEP
repeatedly until 00
3. When the timer period is reached, the radio enters
standby mode. To resume listening, press any panel
button (except VOL). The display and radio resumes.
To Next Page
Loading...
