Volume Lock 27
USER
’S GUIDE
VOLUME LOCK
In its default (unlocked) state, the remote allows
each device to control its own volume only in its
own mode (e.g., TV volume in the TV mode,VCR
volume in VCR mode,etc.). However, using your
remote’s Volume Lock feature, you can adjust the
volume for a certain device (e.g., TV) while in a
different mode (e.g.,VCR). For example, if you’re
watching a movie on your VCR, you can adjust the
volume on your TV without first pressing TV.
You ca n further customize the setting by unlock-
ing the volume controls (see “To Cancel the
Volume Lock Across All Modes”on page 28), so
your device’s volume controls are unlocked in one
mode, but locked in all other modes.
To lo ck the volume control to the TV while in
another mode (VCR,DVD,SAT,AUD or CD
mode):
1. Hold down P for at least 3 seconds. The bottom
of the IR Indicator blinks twice, and a circle
appears around P.
2. Press 9 9 3.The bottom ofthe IR Indicator
blinks twice.
3. Press TV and the bottom part of the IR
Indicator blinks twice. Now you can control
VOL+/- or MUTE functions of your TV while in
other modes.
To unlock the volume control for a specific
mode:
T
O CANCEL THE VOLUME LOCK TO YOUR CD
1. Press CD once.
2. Hold down P for at least 3 seconds. The bottom
of the IR Indicator blinks twice, and a circle
appears around P.
3. Press 9 9 3.The bottom ofthe IR Indicator
blinks twice.
4. Press VOL (-) and the bottom part of the IR
Indicator blinks four times. Now when in CD
mode, you will be able to control VOL+/- func-
tions of your CD (provided it has volume
control).
To Next Page
Loading...
