To Next Page
E
Elizabeth ArmstrongJul 31, 2025
What to do if I have tried all the codes under my device’s brand, my Radio Shack universal Remote Control still does not work?
- FffullerJul 31, 2025
Use Manual Search or Auto Search to find the proper codes.
What to do if I have tried all the codes under my device’s brand, my Radio Shack universal Remote Control still does not work?
Use Manual Search or Auto Search to find the proper codes.
What to do if my Radio Shack 15-310 device recognized a code, but not all features work?
If the first recognized code doesn't fully work, search again for a more compatible code. The device will power off/on each time it recognizes a code. Ignore unwanted codes by waiting for the device to power off/ on the second (or third, fourth, etc.) time, before pressing a button to confirm the code. Alternatively, try all the 3-digit device codes one by one under the same brand until all or most keys work properly. Write down all the code numbers that work with your device, choose the best code as your set up code.
Why I can’t get the Radio Shack 15-310 Remote Control to pair with my device?
TVs and other devices may power off differently. Make sure you know how yours powers off so you can press the appropriate key at the correct time. Otherwise, the remote will not pair with the device and you will have to try again. You can also try all the 3-digit device codes one by one under the same brand until all or most keys work properly. Write down all the code numbers that work with your device, then try each until you find the best code.
What to do if the red LED doesn’t turn off after I enter the 3-digit code during Brand Code Setup on my Radio Shack 15-310 Remote Control?
If the red LED blinks then stays lit after entering the last digit of the code, the code number is invalid (does not match a code in the Code List). Try the next code for your device.
How to set up Radio Shack 15-310 if I press SET and the appropriate key at the same time but the remote still doesn’t work?
Press and hold SET, then press the appropriate key. The remote will not enter the desired mode if buttons are pressed in the wrong order.
Explains the functions of the Mute, Menu, and Set buttons for basic operation and setup.
Details Channel +/- and numeric 0-9 buttons for channel selection and input.
Covers Aspect, Power, Device, Volume, and Enter buttons for device management.
Describes multi-function keys for media control and menu navigation.
Introduction to setting up the remote using specific brand codes from a list.
Explains Auto Code Search and Manual Code Search methods for programming.
Steps for entering device codes and verifying the setup.
Important notes for Brand Code Setup, including how to quit the setup process.
Steps to start Auto Code Search and confirm a working code.
Key notes regarding staying with the device, stopping search, and changing direction.
Instructions for manually searching device codes using the power button.
Steps to confirm the correct code and turn the device back on.
Procedure to retrieve and verify the currently programmed device code.
Instructions on how to lock a device code to prevent accidental changes.
How to lock volume and mute functions to a specific device.
How to unlock volume and mute functions from a specific device.
Solution for when pressing SET and another key does not work.
Guidance when all brand codes have been tried without success.
Interpreting the red LED behavior during Brand Code Setup.
Tips for when the remote cannot pair with the device.
What to do when a code is recognized but not all features work.
Details supported equipment, power requirements, and battery life.
Information regarding FCC rules and potential radio frequency interference.
Details the warranty period, what is covered, and common exclusions.
Procedure for obtaining warranty service and making claims.
Provides contact information for RadioShack Customer Relations.
Information on recycling used electronics.
General| Brand | Radio Shack |
|---|---|
| Model | 15-310 |
| Category | Remote Control |
| Type | Universal Remote |
| Device Support | TV, VCR, Cable Box |
| Power Source | Battery |
| Number of Devices | 3 |
