Radio Shack 15-310 - Remote Setup Methods; Brand Code Setup Overview; Automatic and Manual Code Search

5
2 Setup
YouruniversalremotecanoperateaTV,VCR,DVD,cable
orsatellite.
Setupyouruniversalremoteinoneofthreeways:
• Brand Code Setup: Directlyenterthedevicecode
fromtheCodeList.Tryeachcodeuntilyoundone
thatworksforyourdevice.
• Auto Code Search: Youruniversalremote
automaticallygoesthroughallthedevicecodes.
(Thismethodcantakeupto45minutestosearchall
thecodesforthe3devices.)
• Manual Code Search: Manuallygoesthrougheach
codeforyourdeviceonebyoneatthetouchofthe
G button.
n Note: Keep your remote pointed at the device that
you want to program throughout setup.
Brand Code Setup
1. Poweronthedevicethatyouwanttocontrol.
2. Findthecode(orcodes)foryourdeviceinthe
includedCode List.Ifyourdevice’sbrandisnot
listed,usethe Auto Code Search orManual Code Search
method.
3. Onyouruniversalremote,pressandholdSET,and
thenpressadevicekey(TV,VCR/DVDorSTB/CBL).