Radio Shack 15-310 - Troubleshooting Common Issues; Incorrect Button Press Sequence; Device Not Responding to Codes; Brand Code Setup LED Indicators

12
• Donotmixoldandnewbatteries,differenttypesof
batteries(alkaline,orrechargeable),orrechargeable
batteries of different capacities.
• Ifyoudonotplantousetheremoteformorethan
one week, remove the battery. Batteries can leak
chemicals that can damage electronic parts.
Troubleshooting
Problem Solution
IpressSETandthe
appropriatekey
atthesametime
buttheremotestill
doesn’twork.
PressandholdSET,thenpressthe
appropriatekey.
Theremotewillnotenterthedesired
modeifbuttonsarepressedinthe
wrongorder.
Ihavetriedallthe
codesundermy
device’sbrand,my
universalremotestill
doesnotwork.
UseManual SearchorAuto Search
tondthepropercodes.
TheredLEDdoesn’t
turnoffafterIenter
the3-digitcode
duringBrandCode
Setup.
•IftheredLEDturnsoffafterenter-
ingthelastdigitofthecode,the
codenumberis valid(matchesa
codeintheCodeList).
•IftheredLEDblinksthenstayslit
afterenteringthelastdigitofthe
code,thecodenumber is invalid
(doesnotmatchacodeintheCode
List).Trythenextcodeforyour
device.